Search
Close this search box.

How to Fix Cupboard/ Cabinet Hinges: Quick Solutions

cupboard-cabinet-hinges | Furniture Hinges - Singapore | JKH

Share This Post

Cupboard/ Cabinet doors may need to be repaired, changed, or reinstalled during or after installation. The first step is to take the help of a good quality handyman service provider. If anyone does it, the trouble will increase later, and money will be spent a lot. As soon as the Cupboard/ Cabinet problems appear, they should be repaired, replaced, and fixed by skilled workers.

Cupboard/ Cabinet Hinge Installation

Maintain step-by-step full guidelines for the best Cupboard/ Cabinet Hinge Installation.
Here is a step-by-step guideline for installing traditional cabinet hinges:
Step-1- Mark the Door and Place pointing to the Hinges.
Step-2- Spacing has to be done perfectly Between the Hinges.
Step-3- tape the Hinges in Place.
Step-4- Drive Screws on the Cabinet-Side of the Hinge.
Step-5- Glue the Door to the Hinge.
Step-6-Drive Screws on the Door-Side of the Hinge.

These steps are ideal for Cupboard/ Cabinet Hinge Installation.

Cupboard/ Cabinet Hinge Replacement

Replacing Cupboard/ Cabinet hinges is not a difficult task. But lack of skill can lead to the loss of valuable cabinets. So when Cupboard/ Cabinet hinges need to be repaired or new hinges need to be installed, the help of a competent organization like JKH Engineering should be taken. This will save time and keep valuable assets safe.
We can install brand new hinges with careful preparation and a few tools. We have 1000+ customer positive reviews on this. JKH Engineering has been providing local handyman services in Singapore since 2012 with a reputation.

How to Replace Cupboard/ Cabinet Hinges?

There are three steps to follow for hinge replacement.
1. Remove the Old Hinge
-Unscrew the part of each hinge that attaches to the door.
-Remove the door.
-Unscrew the part of each hinge that attaches to the cabinet frame using either a screwdriver or a drill.
-Remove the hinge from the cabinet frame.

2. How to Replace with the Same Type of Hinges?

-Take your old hinge to a home improvement store.
– Differences between old holes & new holes to be same
-using a screwdriver or drill Screw the new hinges into the cabinet door
-Must take an assistant to hold the cabinet door against the cabinet frame.
-Set the new hinges very carefully
-After that screw the new hinges into the cabinet frame perfectly.

3. Replace with a Different Type of Hinge

-Purchase new hinges from the store.
-For small lines, use a pencil with a ruler
– Mark the center point where the old hinge is attached to the cabinet frame.
-Make a line of your new hinges up on your door.
-Mark the screws attaching locations using a pencil.
-To make a pilot hole, a Drill using is mandatory for each hinge on the cabinet door.
-Ask an assistant to hold the door of the cabinet against the cabinet frame.
– After all, the screw fitting on the pilot hole successfully the cabinet

 

JKH ENGINEER LTD SINGAPORE BEST HANDYMAN FOR WARDROBE REPAIR SERVICE

wardrobe fixing: Wardrobe Repair Service If you need some wardrobe fixing, look no further than JKH Engineering - the
wardrobe fixing Wardrobe Repair Service-www.jkhengineering.com

Quick Solutions for Cupboard/ Cabinet doors lose

Why are my Cupboard/ Cabinet doors loose?

• Screws loose:

Frequent opening and closing of Cupboards/ Cabinets loosen the hinge screws. Also, over time after prolonged use, the screws may loosen. Cupboard/ Cabinet doors will feel loose.

• The door is too heavy for the hinges:

In an ideal world, hinges help support and hold your cabinet doors in place. This makes it easier to open and close the door. If the Cupboard/ Cabinet door does not have adequate hinge support, it may begin to sag.

• The screw holes are stripped:

A “stripped” screw hole is a fancy term for a screw hole. It is too big for the corresponding screw. When this happens, then the Cupboard/ Cabinet door might seem loose.

Wardrobe Repair Service
Wardrobe Repair Service-handyman to fix wardrobe,www.jkhengineering.com

How can we fix a loose cabinet door?

1. Removing the Cupboard/ Cabinet door and filling in the damaged surface is the solution of it. Firstly, have to Grab a screwdriver and completely detach the door and hinges. Then follow the door set aside, and pick up a container of wood filler. After Applying the filler with a putty knife, spread it all over the damaged area. At the final stage, wait for the wood filler to cure completely.
2. Secondly, Sand and paint over the repaired section of the cabinet properly & Gently buff the dried filler. Then, let it paint over the filler so it blends in. Let the paint dry completely before you continue to use it.
3. A hinge can snap off a cabinet at any time. Better advice is for you, being a handyman expert I will tell you, must replace all of your hinges instead of working with the old ones. Unscrew the existing hinges and install the new set and then reattach the door to the cabinet.

Make an appointment for booking on JKH Engineering for your booking. Call us on +6591746214 and WhatsApp on WhatsApp on +6591746214 for getting service.

More To Explore